advistment

Search This Blog

Tuesday, April 25, 2023

Conversion of HYSYS Simulation


PROBLEM STATEMENT . 


Develop a model that represents partial oxidation of methane to produce hydrogen. 

• Given the following

 conditions; Fluid package: Peng- Robinson Temperature: 25°C. Molar flow for CH4 : 100 kgmole/hr

 Pressure: 2 bar. Molar flow for Air(79% N2 & 21% O2): 260 kgmole/hr %Conversion: 40% and 60% for

 Rxn 1 and 2 resp


BUILDING THE SIMULATION

 • Access Hysys. 

Define Simulation Basis. 

• Add reactions. Add reaction sets. Make sequential reactions. 

• Attach reaction to fluid package. Add feed streams 

• Add the conversion reactor 






 

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Pump Power Simulation

       Learning Objective  > How to simulate a pump unit in Aspen HYSYS to find   out actual  power required to pump the fluid.  > Pum...

  • Crude Oil Pre Heat simulation
      Problem Statement Cont. A crude stream at 15°C, 1000 kPa and flowrate  of 6x105 kg/hr is  mixed with a stream of water  at 15°C, 1000 kPa ...
  • NGL Fractionation 2
    Feed part2 Feed Characteristics Pressure (kPa) 5000 Temperature 25 (°C) Molar Flow (kgmol/hr) 2988 Feed Composition Nitrogen 1.49E-02 CO2 2....
  • Bubble Point and Dew Point Calculation
      Learning Objective  Bubble point and dew point of pure components.   Bubble point and dew point of mixtures Definitions  Bubble Point: The...